Cement production line
Grinding station
Rotary kiln
Grinding Equipment
Drying Equipment
Cooling machine
Crusher
Feeder
Dust collector
Motor reducer
Home >> Products Center
 
 
Bucket elevator

【Lift height】:28-32 .7 m 
【Throughput】:3-60m3 / h 
【Applications】: such as: coal, cement, stone, sand, clay and ore. 
【Introduction】: The machine is applicable for conveying powder, granular and small block of non-abrasive and small abrasive materials, such as: coal, cement, stone, sand, clay, ore, etc., because improved the ring of the traction chain, thus allowing transport of high temperature materials.

The hoist has a conveying capacity, high hoisting height, stable and reliable, long life and significant advantages, its main properties and parameters in line with JB3926 ---- 85 "Vertical Bucket elevator" (with reference to the standard equivalent to international standards and advanced foreign standard), the traction ring chain compliance MT36 ---- 80 "Mining High intensity ring chain", the elevator for conveying powder, granular and small block of non-abrasive and abrasive materials small , such as: coal, cement, stone, sand, clay, ore, etc., because the traction hoist is a ring chain, thus allowing delivery of high temperature materials.

Features

1, Bucket elevator drive power is small, the use-feed into the induction discharge, large capacity hopper intensive layout. Increase in materials almost no feed back and dug material phenomenon, so less power is invalid. 
2, Bucket elevator to enhance a wide range of these types of materials hoist, less demand, not only can enhance the general powdery, granular materials, but also enhance the larger abrasive materials, sealing, environmental less pollution. 
3, operation reliability, advanced design principles and processing methods to ensure the reliability of machine operation, no down time more than 20,000 hours. Lifting height is high. Hoist running smoothly, so you can upgrade to a higher level. 
4, Bucket elevator, long life, take inflow feeding hoist type, without using bucket excavating, squeezed between the materials and collision phenomenon rarely occurs. The machine was designed to ensure that the feed material, unloading few scattered, reducing mechanical wear.

Work principle

Material from the hopper to scoop up the following storage medium, with conveyor belts or chains upgraded to the top, after bypassing the top wheel turned downward, Bucket elevator to accept the material is poured into the tank. Bucket elevator belt drive transmission belt generally use rubber band attached to the lower or above the upper and lower drive roller and the idler pulley. Bucket elevator chain drive with two generally parallel transmission chain, on or below a pair of drive sprocket, the next bend, or at a pair of sprockets. Bucket elevator are generally equipped with casing to prevent Bucket elevator in the dust.

Technical parameters

Specification

Max lifting height 
(M)

Throughput
(M³ / h)

Bucket distance
(Mm)

Motor power (kw)

160 type

28

3-8

500

3-7.5

200 type

31.5

6-15

500

3-7.5

250 type

30.16

10-25

500

4-11

300 type

30.16

25-35

500

5.5-15

350 type

31

19-40

600

7.5-18.5

400 type

32

35-50

600

7.5-22

450 type

32.7

42-60

600

7.5-22

 

 

 

 

china cement machinery and spare parts supplier   

Contact:  +86 138 100 75071
E-mail: yumao.an@bjtechno.com
           anyumao@gmail.com
Address: No.8 Guanghua Road,Chaoyang District,Beijing 100026,China
 
[ Back ]
 
Home | About us | Products Center | News & Events | Service & Parts | Fitting Market | Contact us
Copyright(C)2013, Beijing Techno import & Export Corporation All Rights Reserved. Supported by Toocle Copyright Notice